| 1Greetings |
.1-1
DOORS 11 ePARTS OVERVIEW |
Introduction
Thank you for your interest in the DOORS 11 eParts
product
by ARCHIdigm. This product complements our
Garage Doors eParts
and Window Styles eParts
products by offering over 100 Residential and light Commercial Door Styles. Primary door
groups include interior, entry, entry systems, stock, barn and light
commercial.
Door Styles in this product range from simple
shapes based on Profiles to complex Door/Window Assembly Styles that use
custom Blocks and Curtain Wall Unit Styles. All Door Styles come with
trim on both sides that can be adjusted using Profiles. Knowledgeable ACA users can use the solutions exemplified in this product to
create numerous unique custom designs.
This product contains
several drawing files configured for use in ACA 2011 and up
Users can install this product through the Content Browser as a new Catalog.
Note:
This is not a stand-alone software
product; it is a library of Object Styles for use in
AutoCAD®
Architecture 2011 CAD
program.
|
|
| 2Product
Features |
2-1 DOORS 11 ePARTS OVERVIEW |
|
Standard Rectangular Door Objects
In the Standard
Category of Rectangular Door Styles, you will find three groups or
Palettes divided into "Wood", "Stucco" and "Masonry". All of these
Door Styles have been customized in a similar fashion. In fact, the
"Wood" and "Stucco" Door Styles are nearly identical.
Each of
these Door Styles has a complex set of Blocks attached to represent top
center, top corner left, top corner right, side and side right. In Plan View, illustrated to
the right, you should only see the Blocks for the inside and outside left
and right sides (or jambs).
The shape of
all trim Blocks is controlled by individual Profiles assigned to the various
positions around the Doors.
The Standard
Rectangular Door Styles use the
"Auto-adjust
to Width of Wall" setting and will thus fit any wall width. You
cannot, however, change their shape because Block attachments will not
conform to non-rectangular shapes; separate styles have been included for
non-rectangular shapes.
|
 |
| |
|
| Door
Display Components for Elevation, Model and Model High
Detail
Standard and Complex Rectangular Door Styles
have been configured with numerous trim components to allow for a
variety of trim configurations. You will find these Display Components
under the "Elevation", "Model" and "Model High Detail" Display
Representations.
In the
illustration to the right I show how turning these Display Components On or
Off can have a dramatic effect on how the window looks. Interior and
Exterior Top
Corners come with duplicate components: one that wraps the corner and one
that runs straight out beyond the adjacent trim. Other components
include, four grille configurations, a default muntin layout and a default keystone.
|
 |
| The Structure
of our Complex Door Library If you have
done any customization of Doors in AutoCAD Architecture or simply worked
with the stock content, you may have discovered the numerous limitations set
by working with door Profiles. One of the greatest limitations is that
you have to Attach Blocks into Profile Voids if you want Panels (by default,
the voids become glass). We decided to replace the whole panel itself
with a single Block created from other Object Styles that are better suited
for working with glazing, panels, rails and stiles. Then, to make our Doors
even better, we added trim that uses a Profile so you can not only change
the dimensions but the shape with just a few clicks. Oh, we added
handles and knobs too.
For those who prefer to work with door
Profiles, we have included numerous Door Styles that are based on stock
content but include hardware and trim. |
 |
| Content in this Package:
(see Example Palettes)
#x# = Number of Panels Wide by High, F=Full, G=Glass,
v=vision, L=Louver, sg=short grill
Doors
(Door Objects)
Folding - Double - Interior - Closet - P1x2 - Trim
Folding - Double - Interior - Closet - PL1x2 - Half - Trim
Folding - Double - Interior - Closet - PL1x2Trim
Folding - Double - Interior - Closet - Trim
Folding - Single - Interior - Closet - P1x2 - Trim
Folding - Single - Interior - Closet - PL1x2 - Half - Trim
Folding - Single - Interior - Closet - PL1x2 - Trim
Folding - Single - Interior - Closet - Trim
Gliding - Double - Entry - Trim
Gliding - Double - Interior - Closet - FG - Trim
Gliding - Double - Interior - Closet - P1x1 - Trim
Gliding - Double - Interior - Closet - P1x3 - Trim
Gliding - Double - Interior - Closet - P2x4 - Trim
Gliding - Double - Interior - Closet - Trim
Gliding - Triple - Interior - Closet - FG - Trim
Gliding - Triple - Interior - Closet - Trim
Hinged - Double - Entry - FG - Trim
Hinged - Double - Entry - FG2x4 - Trim
Hinged - Double - Entry - Panel 1x1v short grill - Trim
Hinged - Double - Entry - Panel 1x2 - Trim
Hinged - Double - Entry - Panel 1x2 Arch - Trim
Hinged - Double - Entry - Panel 1x2v - Trim
Hinged - Double - Entry - Panel 1x4 - Trim
Hinged - Double - Entry - Panel 2x2 - Trim
Hinged - Double - Entry - Panel 2x2av - Trim
Hinged - Double - Entry - Panel 2x2b - Trim
Hinged - Double - Entry - Panel 2x2v - Trim
Hinged - Double - Entry - Panel 2x2v Oval - Trim
Hinged - Double - Entry - Panel 2x3 - Trim
Hinged - Double - Entry - Panel 2x4 - Trim
Hinged - Double - Entry - Panel 2x4v - Trim
Hinged - Double - Entry - Panel 2x4v Arch - Trim
Hinged - Double - Entry - Trim
Hinged - Double - Interior - 1x2 - Trim
Hinged - Double - Interior - 1x2_Arch - Trim
Hinged - Double - Interior - 1x4 - Trim
Hinged - Double - Interior - 2x2 - Trim
Hinged - Double - Interior - 2x2b - Trim
Hinged - Double - Interior - 2x3 - Trim
Hinged - Double - Interior - 2x4 - Trim
Hinged - Double - Interior - Cafe - Trim
Hinged - Double - Interior - Closet - Trim
Hinged - Double - Interior - FG - Trim
Hinged - Double - Interior - FG2x4 - Trim
Hinged - Double - Interior - Screen - Trim
Hinged - Double - Interior - Trim
Hinged - Reverse - Double - Entry - Trim
Hinged - Reverse - Single - Entry - Trim
Hinged - Single - Entry - FG - Trim
Hinged - Single - Entry - FG2x4 - Trim
Hinged - Single - Entry - Panel 1x1v short grill - Trim
Hinged - Single - Entry - Panel 1x2 - Trim
Hinged - Single - Entry - Panel 1x2 Arch - Trim
Hinged - Single - Entry - Panel 1x2v - Trim
Hinged - Single - Entry - Panel 1x4 - Trim
Hinged - Single - Entry - Panel 2x2 - Trim
Hinged - Single - Entry - Panel 2x2av - Trim
Hinged - Single - Entry - Panel 2x2b - Trim
Hinged - Single - Entry - Panel 2x2v - Trim
Hinged - Single - Entry - Panel 2x2v Oval - Trim
Hinged - Single - Entry - Panel 2x3 - Trim
Hinged - Single - Entry - Panel 2x4 - Trim
Hinged - Single - Entry - Panel 2x4v - Trim
Hinged - Single - Entry - Panel 2x4v Arch - Trim
Hinged - Single - Entry - Panel 3x2v_b - Trim
Hinged - Single - Entry - Panel 3x2v_c - Trim
Hinged - Single - Entry - Trim
Hinged - Single - Interior - 1x2 - Trim
Hinged - Single - Interior - 1x2_Arch - Trim
Hinged - Single - Interior - 1x4 - Trim
Hinged - Single - Interior - 2x2 - Trim
Hinged - Single - Interior - 2x2b - Trim
Hinged - Single - Interior - 2x3 - Trim
Hinged - Single - Interior - 2x4 - Trim
Hinged - Single - Interior - A1 - Trim
Hinged - Single - Interior - FG - Trim
Hinged - Single - Interior - FG2x4 - Trim
Hinged - Single - Interior - Screen - Trim
Hinged - Single - Interior - Trim
Hinged - Single - Interior - Trim - ADA - Men - Left - Pull
Hinged - Single - Interior - Trim - ADA - Men - Left - Push
Hinged - Single - Interior - Trim - ADA - Men - Right - Pull
Hinged - Single - Interior - Trim - ADA - Men - Right - Push
Hinged - Single - Interior - Trim - ADA - Women - Left - Pull
Hinged - Single - Interior - Trim - ADA - Women - Left - Push
Hinged - Single - Interior - Trim - ADA - Women - Right - Pull
Hinged - Single - Interior - Trim - ADA - Women - Right - Push
Opening - Interior - Trim
Pocket - Double - Interior - 2x3 - Trim
Pocket - Double - Interior - Trim
Pocket - Single - Interior - 2x3 - Trim
Pocket - Single - Interior - Trim |
Doors
for use in Door/Window Assemblies
(Door Objects)
DWA - Folding - Five - Entry
DWA - Folding - Four - Entry
DWA - Folding - Single - Entry
DWA - Folding - Three - Entry
DWA - Gliding - Double - Entry
DWA - Hinged - Double - Entry
DWA - Hinged - Double - Entry - FG
DWA - Hinged - Double - Entry - FG2x4
DWA - Hinged - Double - Entry - Panel 1x1v short grill
DWA - Hinged - Double - Entry - Panel 1x2
DWA - Hinged - Double - Entry - Panel 1x2 Arch
DWA - Hinged - Double - Entry - Panel 1x2v
DWA - Hinged - Double - Entry - Panel 1x4
DWA - Hinged - Double - Entry - Panel 2x2
DWA - Hinged - Double - Entry - Panel 2x2av
DWA - Hinged - Double - Entry - Panel 2x2b
DWA - Hinged - Double - Entry - Panel 2x2v
DWA - Hinged - Double - Entry - Panel 2x2v Oval
DWA - Hinged - Double - Entry - Panel 2x3
DWA - Hinged - Double - Entry - Panel 2x4
DWA - Hinged - Double - Entry - Panel 2x4v
DWA - Hinged - Double - Entry - Panel 2x4v Arch
DWA - Hinged - Folding - Entry
DWA - Hinged - Single - Entry
DWA - Hinged - Single - Entry - Dutch - Bottom
DWA - Hinged - Single - Entry - Dutch - Top
DWA - Hinged - Single - Entry - FG
DWA - Hinged - Single - Entry - FG2x4
DWA - Hinged - Single - Entry - Panel 1x1v short grill
DWA - Hinged - Single - Entry - Panel 1x2
DWA - Hinged - Single - Entry - Panel 1x2 Arch
DWA - Hinged - Single - Entry - Panel 1x2v
DWA - Hinged - Single - Entry - Panel 1x4
DWA - Hinged - Single - Entry - Panel 2x2
DWA - Hinged - Single - Entry - Panel 2x2av
DWA - Hinged - Single - Entry - Panel 2x2b
DWA - Hinged - Single - Entry - Panel 2x2v
DWA - Hinged - Single - Entry - Panel 2x2v Oval
DWA - Hinged - Single - Entry - Panel 2x3
DWA - Hinged - Single - Entry - Panel 2x4
DWA - Hinged - Single - Entry - Panel 2x4v
DWA - Hinged - Single - Entry - Panel 2x4v Arch
DWA - Hinged - Single - Entry - Panel 3x2v_a
DWA - Hinged - Single - Entry - Panel 3x2v_b
DWA - Hinged - Single - Entry - Panel 3x2v_c
Door Systems
(Door/Window Assembly Objects)
Openings_Entry_2_Sidelight_Transom_Trim
Openings_Entry_2_Sidelight_Transom_Trim - Craftsman
Openings_Entry_2_Sidelight_Trim
Openings_Entry_C1
Openings_Entry_Double_Hinged_2_Sidelight_3_Transom_1x1v_short_grill_Trim
Openings_Entry_Double_Hinged_2_Sidelight_3_Transom_1x3v_2_Trim
Openings_Entry_Double_Hinged_2_Sidelight_3_Transom_FG2x4_Trim
Openings_Entry_Double_Hinged_2_Sidelight_3_Transom_Trim
Openings_Entry_Double_Hinged_2_Sidelight_Trim
Openings_Entry_Double_Independent_Trim
Openings_Entry_Dutch_Trim
Openings_Entry_Folding_3_Trim
Openings_Entry_Folding_4_1_Hinged_Trim
Openings_Entry_Folding_4_Trim
Openings_Entry_Folding_5_1_Hinged_Trim
Openings_Entry_Folding_5_Trim
Openings_Entry_Folding_6_1_Hinged_Trim
Openings_Entry_Gliding_OXXO_4_Transom_Trim
Openings_Entry_Gliding_OXXO_Trim
Openings_Entry_Multi-Door_Trim
Openings_Entry_Sidelight_1x1v_short_grill_Trim
Openings_Entry_Sidelight_1x2v_Trim
Openings_Entry_Sidelight_2x2v_oval_Trim
Openings_Entry_Sidelight_2x2v_Trim
Openings_Entry_Sidelight_2x4v_arch_Trim
Openings_Entry_Sidelight_2x4v_Trim
Openings_Entry_Sidelight_3x2v_c_Trim
Openings_Entry_Sidelight_FG2x4_Trim
Openings_Entry_Sidelight_Panel_1x2_Arch_Trim
Openings_Entry_Sidelight_Panel_1x2_Trim
Openings_Entry_Sidelight_Panel_1x4_Trim
Openings_Entry_Sidelight_Panel_2x2_Trim
Openings_Entry_Sidelight_Panel_2x2b_Trim
Openings_Entry_Sidelight_Panel_2x3_Trim
Openings_Entry_Sidelight_Panel_2x4_Trim
Openings_Entry_Sidelight_Trim
Openings_Interior_A1
Openings_Interior_A2
Openings_Interior_Closet
Openings_Interior_Closet_1x4
Openings_Interior_Closet_2x4
Openings_Interior_Closet_Louver_Full
Openings_Interior_Closet_Louver_Half
Openings_Interior_Closet_P1x2
Openings_Sidelight_Panel_1x1vsg
|
| 3Purchase |
3-1 DOORS 11 ePARTS OVERVIEW |
Purchase
Online, Get Website + Password and Download
|
Use |
This
product contains several drawing (.dwg) files for AutoCAD Architecture
2011 and up. Instructions for adding to custom tool palettes are
included. A Content Catalog with Categories and Tool
Palettes is included with
this product. |
|
Buy |
Purchase
the latest Version of this Product to acquire this version as well.
Newest version includes all older versions. |
|
FYI |
A list of
all our products can be found at
www.archidigm.com/classroom |
Contact:
kits@archidigm.com |
Installation:
To use the included Content Browser Catalog, installation must be done
according to the instructions included with purchase. However, after
installation, you can use the Move feature of the Content Browser to
relocate this product. |
DOORS
11 ePARTS
for
AutoCAD®
Architecture
2011 and up